Shepherd Engine Problems - Page 3
 

Shepherd Engine Problems

Started by rv_safetyman, July 11, 2009, 01:44:13 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 All
User actions

buswarrior

#30
July 15, 2009, 09:59:50 PM
Darn, I'm not much help, other than I'm pulling for you!

happy coaching!
buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

rv_safetyman

#31
July 17, 2009, 07:41:34 PM
Clifford, I sent you the Serial Number for the engine in Utah (via your yahoo.com mail box).

Supposed to have 168K on the reset ECM and 4500 hours.  Just to be on the safe side, here is the S/N again:  06R0521890.

Thanks for the help.

Jim
Jim Shepherd
Evergreen, CO
'85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/

luvrbus

#32
July 17, 2009, 08:16:37 PM
Jim, Cole said that is a DD rebuild was rebuilt at 443,000 miles due to piston failure and was a 430 hp originally he will have all the details for Monday if he has time    good luck and sorry about your truck when it rains it pours
Life is short drink the good wine first

harpold700 3

#33
July 19, 2009, 10:00:16 AM
Not sure how your making out at this point, but I was looking in the truck paper, some outfit had about 12 used 60 series for $2500.00 each. I don't have the # right now. but will get it to you in a few hours from now.  Gord.
3 dressed up as a 9

harpold700 3

#34
July 19, 2009, 03:15:26 PM
OK here is the #, 866-922-6455. The outfit is called Hagerman,Inc. they are in Umatilla OR.  Says they have 15 left @ $2500.00 each exchange."Inspected and test run" DDEC 11, 111 & 1V available.  Their E-Mail is  hagerman@eotnet.net.  Might be worth a call. Good Luck. Gord.
3 dressed up as a 9
Print
Go Up Pages 1 2 3 All
User actions