Awning fabric stretch?
 

Awning fabric stretch?

Started by grantgoold, March 09, 2009, 10:24:15 PM

Previous topic - Next topic

grantgoold

Anyone have problems with awning fabric stretch. It looks like an awning of mine has stretch so much that I am about 1 rotation short of complete closure. Anybody replaced their fabric and solved the problem. I have reset the limit switch settings and the motor rotates and then stops. Per the instructions (somfy) I have pulled out the limit buttons and supposed to have unlimted rotations (within limits).

From the technical manuals, it appears that I have 46 rotations from fully out to fully in? I will count tomorrow just how many I am getting.

The fabric is at least 6 years old and trashed.

Anybody have some ideas of why I cannot get a full recoil.

This is a retractable lateral awning 14 feet wide and will extend 10 feet.

Thanks

Grant
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California

luvrbus

Grant, what brand of awning do you have and is the fabric a vinyl or Sunberlla cover,vinyl will stretch but the Sunbrella won't.I can help a little with the Zip/Dee or the Gerard but not much on the other brands.I would check the wrap on the drum to start with and make sure it is correct Zip/Dee is pretty straight forward the drum goes through the fabric and is riveted to the drum.  

good luck
Life is short drink the good wine first

grantgoold

The awning is from ABC (now defunct). From what I can tell, this is a standard non-cassette retractable lateral arm awning. I have fabricated the cassette for the entire unit. I have not been able to determine which somfy motor is inside as I will do that when I go to replace the fabric and pull the entire roller unit apart. It looks like I have a 3 inch roller tube. Like I said the fabric is cloth and completely trashed.

Thanks

Grant
Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California