Kenworth T2000 Electric Wiper Wiring (transplant to bus) - Page 2
 

Kenworth T2000 Electric Wiper Wiring (transplant to bus)

Started by Melbo, January 28, 2009, 04:56:15 PM

Previous topic - Next topic

NJT5047

Quote from: Brian Diehl on January 29, 2009, 08:00:45 PM
I have a few additional pictures I could send by email if desired.  Just let me know.

Please!   Send to njt5047@yahoo.com   
Thanks, JR
JR Lynch , Charlotte, NC
87 MC9, 6V92TA DDEC, HT748R ATEC

"Every government interference in the economy consists of giving an unearned benefit, extorted by force, to some men at the expense of others."

Ayn Rand

Melbo

Thanks for all the help and advice

I went to inland Kenworth here in Albuquerque and they gave a schematic

The power goes in on the "P" wire and the WW wire is the washer and all the others just match up.

Thanks again for all the tips

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF

prevost82

Here's a PDF on the layout of a single motor setup

NJT5047  .... The dash in the picture is out of a NaviStar Truck.


NJT5047

Quote from: prevost82 on February 01, 2009, 10:33:33 AM
Here's a PDF on the layout of a single motor setup

NJT5047  .... The dash in the picture is out of a NaviStar Truck.


Quote from: prevost82 on February 01, 2009, 10:33:33 AM
Here's a PDF on the layout of a single motor setup

NJT5047  .... The dash in the picture is out of a NaviStar Truck.

Thanks! I'll download the diagram and save it for near future use!  JR
JR Lynch , Charlotte, NC
87 MC9, 6V92TA DDEC, HT748R ATEC

"Every government interference in the economy consists of giving an unearned benefit, extorted by force, to some men at the expense of others."

Ayn Rand