MCI 102 -1/4 turn panel locks and rubber parts
 

MCI 102 -1/4 turn panel locks and rubber parts

Started by Doug1968, October 21, 2008, 06:20:08 PM

Previous topic - Next topic

Doug1968

Good evening everyone,

Can anyone tell me where I can purchase hardware components for my MCI 102 bus. I am currently wanting to replace some of the 1/4 turn panel locks and clips, but I am also wanting to replace some of the rubber components around the hinged panels. The door to the drivers side electrical panel has a rubber perimeter seal as does the removable panel at the front of the bus that allows access to behind the wiper control switches.

It would be good to know if there are places to by these items. I have an MCI parts manual for the bus but it is of pretty poor technical quality? I cannot find anything in the book about the entry door or the windshield washer system?

I would like to replace the windshield washer nozzles but I have no part number for these. I called MCI parts and gave the fellow my bus model number and ordered the washer nozzles, a seal for the entry door, a rebuild kit for the door cylinder, and the new MCI emblem for the front. The door seal, nozzles and the MCI emblem are not the correct items for my bus? I have not tore into the cylinder rebuild yet?

Does anyone have another source for MCI parts that they could pass on to me, or possibly a contact at MCI that is really sharp on the parts?

Thanks in advance for any information,

Doug


1986 MCI 102A3 - 8V92 - 5 speed
Vancouver, Washington

lostagain

Ask the MCI parts man/lady to fax you the relevent page for the parts for your model no:. Then you can pick from it. We did that recently when I needed drive line parts and the manual was in the bus away from me.

JC
JC
Blackie AB
1977 MC5C, 6V92/HT740 (sold)
2007 Country Coach Magna, Cummins ISX (sold)