Marker lens leaks

[mwf]

What is the best way to seal the Marker lenses on my bus? (MCI 96A3) The seals seem to leak, when they are hot and the water gets on them they break.  I seem to be using about 6 a year, and they are kinda expensive (50.00+ Napa in town has them in stock for a box of 10).  Also looking for a new red lens.  I have one with a whole in it.  (a lot of the lenses are also cracked).

Thanks in advance for any advice on this.

Stan

[Hobe]

I have all the MCI clearence light that I will give to any one that needs them. New they are about $30 each. Let me know how many you need . Fred Noth Florida Bus Conversion

[mwf]

I will take half of them, or as many as you are willing to part with as a lot of mine have corrosion issues and rusted inside screws, as well as cracks.  I am sure I will be replacing them when they are bad.
I think you sent me a window with Jack, thanks a lot for that I will be picking it up when he returns to Arcadia.

Your other post talks about molding, I have one missing under some windows near the back on the drivers side.  If that is the molding you have (looks to be about two inches wide, and five or six feet long) I would love to get that too.

Let me know, my e-mail is   mcintoshwrestling@verizon.net    send me an e-mail with the costs including shipping and I will make arrangements with you.

Thanks a lot.

Stan