How to remove paint overspray from windshield?
 

How to remove paint overspray from windshield?

Started by belfert, March 17, 2008, 07:04:32 PM

Previous topic - Next topic

belfert

A gentleman I hired to work on my bus used spray paint inside the bus.  He got overspray on the inside of the windshield.

Do I have to worry about wrecking the glass if I use a scraper to remove the paint?  I know windshields are not normal glass.  I don't want to wreck my new windshields that just cost me $2500 to install.
Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN

gmbusguy1

we do vinyl graphics and always use a new clean single edge razor blade to remove vinyl, the adhesive and paint on glass

Chris

Melbo

I have always used a NEW very sharp razor blade on glass including windshields and had no problems

I would be careful on the curved parts but the flat part should be no problem

HTH

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF

ea187

a razor blade should work or you can get stuff like acrysol it's made by kent and that is it's main job

4104GA

 ;D
I have used MEK and laquer thinner with good results as long as it does not drip on the painted surface.
Razor blades will not harm your windshields and are cheaper.
Enjoy your ride

Sojourner

Brake fluid will take paint off if let it be wet or soak for a day or so. Depend how old paint been on such as few months. Acetone will dissolve most paint as well.

Brake fluid will not hurt most plastic.

After paint removed....soap & water to wash off brake fluid. It water soluble.

If you use good razor blade....make sure the surface is washed clean to be free of dust & dirt before razor. To avoid scratches.

FWIW

Sojourn for Christ, Jerry

ceieio

Go to the hardware store or home center and buy a can of "Goof Off".  It is made to remove paints and adhesives (and more) from where they don't belong.  It should do just fine on your window.

Craig - MC7 Oregon
Craig MC7 - Oregon USA

Barn Owl

Non grit go-jo will work. Learned that one from a painter.
L. Christley - W3EYE Amateur Extra
Blue Ridge Mountains, S.W. Virginia
It's the education gained, and the ability to apply, and share, what we learn.
Have fun, be great, that way you have Great Fun!

Kristinsgrandpa

    A razor blade will leave scratch marks. BTDT  Use anything liquid. I had a lot on the outside windows and used MEK.  acetone also works. Thinner also works if the paint isn't very old.

Mine is acrylic enamel with a hardener in it and thinner wouldn't touch it after a few weeks.

Ed
location: South central Ohio

I'm very conservative, " I started life with nothing and still have most of it left".

Busted Knuckle

Easy Off oven cleaner works well too! Spray it on let sit for about 10 mins and wipe off!
Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

;D Keep SMILING it makes people wonder what yer up to! ;D (at least thats what momma always told me! ;D)

Ray D

The razor blade should work, but you can also buy a clay bar at paint/detal stores which is used for removing overspray from paint, so should work on glass too.

Ray D

edroelle

In college I worked for a painter and my first job was to clean windows.  I have used a razor blade BUT, I sprayed Windex to lubricate and ease removal of the paint.

Ed Roelle
Flint, MI

zubzub

last little note: if there is any kind of tint film on the inside glass acetone may dissolve it (I know gas does as I have splattered tint on the inside of one of my van door window from filling up on a windy day with the  door open up wind of the pump) Moslty learning from mistakes here, the good news is I have made alot of mistakes.

Melbo

Isn't that the way we all learn???

The more mistakes we make the smarter we get

IF we don't make too big a mistake we will survive

Melbo
If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF

chazwood

I use 50 grit sandpaper.


No wait....that's for something else.



Never mind.
1983 Eagle Bus Model 10
6V92
Thekempters.com