Is there any value to this WABCO ABS controller?
 

Is there any value to this WABCO ABS controller?

Started by Brian Diehl, January 30, 2008, 06:12:59 PM

Previous topic - Next topic

Brian Diehl

I have the ABS unit out of the Freightliner truck I tore apart for the engine/transmission.  I also have the ABS control modules that the ABS computer controlled.  This ABS unit also can function as a traction control device.  So, the real question is:  is there any market for this or should I just pitch it?

Dallas

yup, but not here... You'll need to find the proper venue for it.

If I had a modern Freightliner, I'd offer you a chunk just to have it on hand... in case.


Brian Diehl

Quote from: Dallas on January 30, 2008, 06:28:03 PM
yup, but not here... You'll need to find the proper venue for it.


I realize there most likely is no interest from the members of this board.  However, I'd love to know what the "proper venue" is.  TIA

Tom Y

Tom Yaegle

Sammy

Depends on the type of ABS  ECU you have - Cab mounted,frame mounted, or basic, C or D version.
Also depends on amount of sensors and modulators it will control, and voltage it operates at 12 or 24 volts. http://meritorwabco.com/
Take it to a local charter garage, or transit garage.
Show it to them, might be able to get rid of it.  8)

buswarrior

E-bay or the local trucking outfit that runs Freightliners.

There is a bit of cash in those devices.

Check price new (parts supplier, not dealer) and go sub half?

happy coaching!
buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift