leveling roof line

[jlaney]

hello from Texas
working on 80 model le mirage, up front over the drivers area, is a construction
where the 2 defrost fans where mounted above the hat racks. i have cut the extra
frame work out , but the brasing is a 2/2 tubing and comes down approx 1 inch lower than the orig ceiling height. my question is how to handle this problem or just
let it alone. 

[Dreamscape]

Hi jlaney,

Don't know much about your question. Just had to say hello from a fellow Texan. Would like to invite you to a mini bus rally of sorts just north of Dallas on Sep. 13-16. Details in the Upcoming Bus Rally section on this board.

Happy Trails,

Paul

Dreamscape

[Stan]

You don't give much detail on the framing that you are cutting out, so I assume that you know that the roof framing over the driver compartment holds up the front of the bus.

[jlaney]

the portion which i cut out was the bow that was attached to the first and second roof support and didn't seem to have any load bearing effect. it was used only for a space to supply air to the windshield and side windows.

[kyle4501]

If you post a few pictures, it might be easier to get some help 

I don't know your bus, so a picture would help me anyways.

[jlaney]

 thanks kyle
i will try to get some pictures of the prevost. what year and number is your cruiser i had 4514 139  from tyler tx

[kyle4501]

thanks kyle
i will try to get some pictures of the prevost. what year and number is your cruiser i had 4514 139  from tyler tx

Which one? 092('54), 421('55), 598('55), & 918('56). I might be trading one for another tho. A friend just got a fully seated one & doesn't want to convert a seated cruiser, so I'll probably let him have 092 for it. I think his is 865 869.

I love 'em all 

[jlaney]

thanks kyle
i sure was proud on the 4501 139 i had, i know i got more thumbs up with than this prevost.