Dry Ice cleaning/blasting
 

Dry Ice cleaning/blasting

Started by freds, November 10, 2021, 09:32:51 AM

Previous topic - Next topic

freds

I watch a fair amount of YouTube videos on my smart TV and stumbled across videos on Dry Ice Cleaning/Blasting.

Anyway here's the three minute video link:

youtube.com/watch?v=UdpD-y8vsDs

A more finicky video that is 24 minutes long and involves a guy that does luxury vehicle detailing.

youtube.com/watch?v=oxeFi-0BuyI&t=952s

Has anyone done this on their bus?

I have a brushed stainless steel finish on my 1980 Prevost and thinking it could brighten up the finish along with the shootie/greasy engine compartment and rear of the bus.

windtrader

First I've seen but looks effective as an alternative to typical water pressure cleaning systems. Seems like a good way to remove surface material but just like pressure washing it doesn't polish metal. If the surface underneath is acceptable then this might work out but if you want more shine and polish you need to do that work once the surface is clean.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

Jim Blackwood

I looked into it once. It has the great advantage of reducing cleanup to a minimum since the blasting media just vanishes into thin air, leaving behind only the dirt that was removed. Also due to the cold it will freeze any oils making them easier to blast away from the surface. I think it has a lot to recommend it, provided you can find someone convenient to you who offers the service.

Jim
I saw it on the Internet. It MUST be true...

chessie4905

let's see.. doesn't that add to the CO2 in our atmosphere? They say not. Also, soda blasting can be considered.
There are several places that list equipment for doing dry ice blasting and should be easy to obtain if living near a larger city. Wonder if Dippin Dots would work?
GMC h8h 649#028 (4905)
Pennsylvania-central

Jim Blackwood

Some equipment uses a condenser to pull the CO2 out of the atmosphere on site. No environmental impact except the power to run it and the waste disposal from the removed debris.

Soda blasting is good for protecting the workpiece but it does leave a residue to clean up, not that much different from walnut hulls that way. And it is an alkali so not exactly environmentally neutral.

Jim
I saw it on the Internet. It MUST be true...

windtrader

Got a quote from a place nearby. not sure how this compares to hot water pressure washing. but seems reasonable


Dry ice cleaning undercarriage start at $1300 and can go up from there depending on condition. The undercarriage cleaning consists of cleaning the underbelly, wheel wells and the suspension and brake assembly.  Engine bays usually cost $350 but we can add it on for $200 if added with the undercarriage cleaning.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

chessie4905

probably better for East coast with acid rain.
GMC h8h 649#028 (4905)
Pennsylvania-central

Jim Blackwood

I saw it on the Internet. It MUST be true...

Fred Mc

We drive buses that are50-60 years old that are probably one of the more polluting vehicles and we are concerned about the co2 in the air from this? ;D

freds

Quote from: Fred Mc on November 12, 2021, 10:22:12 AM
We drive buses that are50-60 years old that are probably one of the more polluting vehicles and we are concerned about the co2 in the air from this? ;D

Amen brother Fred!!! Just think of the solvent saving....

windtrader

what solvent? Hot water pressure washing doesn't use solvents from my experience. I guess you can dowse the engine first then spray it off.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

lvmci

if you amortized the exhaust of a DD over 365 days in a year, there isn't much exhaust pollution,  compared to 18 wheelers driving across the nation every week...
MCI 102C3 8V92, Allison HT740
Formally MCI5A 8V71 Allison MT643
Brandon has really got it going!