DIY Hydronic plumbing and heat distribution

[freds]

I remember seeing another busnut's design where he routed channels for PEX tubing into plywood for radiant heating.

While I won't be using it, I came across a product that has channels with a preformed aluminum skin for better heat distribution.





You have to custom order from the manufacture and it normally comes in 4 X 8 foot sheets.

However for remodels they have 2 X 4 foot sheets, that you could also install on the walls.

Seems like it might be a nice system if you are converting a bus from scratch and you need to replace the plywood floor anyway.

More info:

https://www.warmboard.com/warmboard-s

[freds]

Was closing down my browser tabs and found some more links that may be interesting.

https://s3.amazonaws.com/finehomebuilding.s3.tauntoncloud.com/app/uploads/2016/08/18055146/Warmboard-S_profile-700x490.jpg

https://ecowarmradiantheat.com/ecowarm-specifcations/

https://www.blueridgecompany.com/radiant/hydronic/527/rht-floor-panel-system