Testing the door claw - Page 2
 

Testing the door claw

Started by Jcparmley, December 06, 2018, 11:31:03 AM

Previous topic - Next topic

Jcparmley

I will be able to look at the switch next week when I am in town.  Thanks for all the help.  I will keep you posted as to what I find.  Thanks
1989 MCI 102c3 6v92TA Mechanical

Paso One

Here is a few snaps this is on a 96 102 D3 If you look thru the opening you can see it.
If you take the cover off you can touch and feel.
68 5303 Fishbowl 40'x102" 6V92 V730 PS, Air shift  4:10 rear axle. ( all added )
1973 MC-5B 8V71 4 speed manual
1970 MC-5A  8V71 4 speed manual
1988 MCI 102 A3 8V92T  4 speed manual (mechanical)
1996 MCI 102 D3 C10  Cat engine 7 speed manual  (destined to be a tiny home )

Jim Eh.

Just be mindful if someone is in the drivers station and operating knobs and switches. One of my guys tried getting his finger tips in behind the lip of the door edge when someone inside activated the claw. Result = nice red stain on the door frame to clean up.
"Some days it's just not worth chewing through the restraints"
Jim Eh.
1996 MC12
6V92TA / HT741D
Winnipeg, MB.