OIL FILTERS - Page 2
 

OIL FILTERS

Started by Eagle, February 08, 2007, 08:33:05 AM

Previous topic - Next topic

ChuckMC8

What intervel does the oil MFG reccomend?
Far better is it to dare mighty things,to win glorious triumphs,even though they may be checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much,because they live in the gray twilight that knows neither victory nor defeat.  Theodore Roosevelt (1858-1919)

gg04

Oil mfg do not give change intervals...around 1963 all major auto mfgs moved change interval to 6000 mile due to modern oil ..in 1965 ford changed all services to 12000 mile includeing need for oil change..by early 70's all major auto mfg suggested 12000 mile oil  change intervals...auto mfg can only require that oil stay within thier specs...the advent of the 10 minute oil change shack brought about the 3000 mile oil change on most of the american public...Oil companies love it, not needed but makes lots of cash...At the last Great American Truck Show (otr) in Dallas all the major engine mfg but one had thier own bypass oil filter system displayed on thier show engines...4 aftermarket mfgs where offering thier systems...mostly based on the current preventive maintenance belifes that  the major cause of wear and breakage on all engines is fuel soot...and other suspended foriegn material..ALL engines need filtering..the factory full flow will only filter untl it goes into bypass due to too much oil volume...on nearly all engines and all brands of filters we tested (this I have not done since 1976) gas engines went into bypass under 2000rpm and diesel filters at around 1300 rpm..then you have no filtering effect at all...just oil from pan to engine..do some research not just quotes from some web site requoting misinformation.....remember over half the information on the web is wrong...and oil filtering ,rerefining is a major suplimental technology that has been part of the oil industry ,with the same engineers and studies, since wwII...gg04
If you personally have not done it  , or saw it done.. do not say it cannot be done...1960 4104 6L71ta ddec Falfurrias Tx