MCI 102A3 stud sizes / dimensions (steel or aluminum)

[luvrbus]

You would think some supplier would give us the number,hell no they guard it like a high level secret,they even go to the trouble of repackaging those and there are no numbers to be found on 1 either     

[chessie4905]

Either get them from Luke or pull one and compare dimensions to the ones in Euclid or equiv. book. Too expensive to take a chance getting wrong ones.

[lostagain]

Yes the 4" is for aluminum wheels. Have you called Mowhack Industries?

JC

[daveola]

Mohawk was over $20.  If it's 4", then I think I've found them.  Should be more clear tomorrow after another round of calls.

MCI claims it's 4.25" for the aluminum, unfortunately, and the steel studs are now actually 4" according to their new part numbers.

[luvrbus]

If you don't have 2 inches of thread on the wheel side they don't work,I have some 4 inch with only 1-5/8 inch on the wheel side I got from Find It Truck Parts @ 6.40 bucks each

[luvrbus]

E-5922 Euclid or 20x 1868 Mertior is supposed to be the right stud,when I got mine they were to short could be they sent the wrong ones too anyways I gave up and called Luke,you can buy the E-5922 or the 20x1868 Mertior for 6 to 8 bucks all over the net ,the ones I got from Luke are 4-1/4 long FWIW,I really don't believe a 1/4 of a inch could make any difference with nuts on both sides that only a 1/8th of inch on each side   

[daveola]

E-5922 Euclid or 20x 1868 Mertior is supposed to be the right stud,when I got mine they were to short could be they sent the wrong ones too anyways I gave up and called Luke,you can buy the E-5922 or the 20x1868 Mertior for 6 to 8 bucks all over the net ,the ones I got from Luke are 4-1/4 long FWIW,I really don't believe a 1/4 of a inch could make any difference with nuts on both sides that only a 1/8th of inch on each side   

I don't quite get it, you don't think 1/4" makes a difference, but you're saying that the ones you got were too short.  Do you still have them?  Do you know how long the wheel threads were?

[luvrbus]

The ones Find It sent me have a 1-5/8 thread on the wheel side not the 2 in I ordered a box of the Chinese made  E 5922 from Nicks Truck Parts last night @ 5.94 ea I will find out in the next week 

[Oonrahnjay]

...  I ordered a box of the Chinese made  E 5922 from Nicks Truck Parts last night ...

       Are you concerned about product quality on these, Clifford? 

[luvrbus]

       Are you concerned about product quality on these, Clifford? 

I am Bruce but this just a test I have good studs already I purchased from Luke, I want to see if the 4 inch E-5922 are long enough lol for 20+ bucks ea this test wouldn't happen