6v92 engine, free bus $1000

windtrader · November 10, 2017, 09:51:03 PM

https://losangeles.craigslist.org/sgv/cto/d/gmc-rts-bus/6378236900.html

eagle19952 · November 11, 2017, 08:07:50 AM

a LEFT HAND rotation here people

luvrbus · November 11, 2017, 08:16:23 AM

That bus is only a couple of hours from me it could be a find and bargain for you lefty guys ,I could get Ronnie to haul it to my place for 5 or $600.00 but I have no need for a lefty if it was right hand engine I would have bought it

Gary Hatt - Publisher BCM · November 11, 2017, 08:32:32 AM

A lefty engine would be great if you like backing up a lot. :-)

eagle19952 · November 11, 2017, 01:42:59 PM

Quote from: luvrbus on November 11, 2017, 08:16:23 AM
That bus is only a couple of hours from me it could be a find and bargain for you lefty guys ,I could get Ronnie to haul it to my place for 5 or $600.00 but I have no need for a lefty if it was right hand engine I would have bought it

the v730 or engine are worth getting.
buy one get one free.

belfert · November 12, 2017, 04:47:08 PM

Wouldn't it be cheaper just to pull the engine and then scrap the remainder? Of course, you might not have the resources to pull the engine where it sits.

luvrbus · November 12, 2017, 05:39:34 PM

Scrap dealers want you to deliver or they charge you more than you can get by selling if they pick it up.The bus being made of Stainless would be a major project to cut up for scrap IMO

chessie4905 · November 13, 2017, 04:19:14 AM

The pictures show the engine and trans separated from coach on the engine subframe. Just need equip to load. That, and maybe tires and wheels, although I wouldn't be surprised if they aren't radials. Bias play transit tires are very common due to their much better ability to handle curbs and such. If you could leave the rest, (save computers and at least some harness with the plugs for ecm and trans,engine), it maybe a good deal. Not worth the effort to cut up the rest, since body panels are of little scrap value and a plasma cutter is going to be needed to cut the ss. Plus,who knows what local regs are to cut it up. Are you allowed to take a DDA two cycle out of California?

B_K · November 13, 2017, 07:22:57 AM

Quote from: chessie4905
The pictures show the engine and trans separated from coach on the engine subframe. Just need equip to load. That, and maybe tires and wheels, although I wouldn't be surprised if they aren't radials. Bias play transit tires are very common due to their much better ability to handle curbs and such. If you could leave the rest, (save computers and at least some harness with the plugs for ecm and trans,engine), it maybe a good deal. Not worth the effort to cut up the rest, since body panels are of little scrap value and a plasma cutter is going to be needed to cut the ss. Plus,who knows what local regs are to cut it up. Are you allowed to take a DDA two cycle out of California?

" Low mile recently rebuilt 6V92 LH Detroit Diesel engine with V731 Transmission with value of $3500+ alone. Have receipts for rebuilt engine. Original engine on site, rebuildable, included if you want it. "

Pretty sure that is a picture of the engine/trans that came out of it when the "rebuilt" one went in!

BK