Prevost right angle fan drive box

[luvrbus]

I will try and get a picture. I will see if I can figure out how to post it here.

Thank You
Wayne

Good luck

[rusty]

WARNING  THREAD CREEP   How big should a picture be to post here ( height  X width )

Wayne

[luvrbus]

WARNING  THREAD CREEP   How big should a picture be to post here ( height  X width )

Wayne

LOL you are in for a treat I gave up a long time ago on posting pictures here,the guys with Tap Talk have it made

[sixtyseven]

Hey Wayne,  When I post pictures I make them 800 x 600, that's about perfect.   

Does your box look similar to this ?    If so it is a Boston gear. 

[luvrbus]

That is the same box Eagle used at the fan hub too on some models ,I tried to post a picture of that model no luck 

[rusty]

Joe Thank you http://i714.photobucket.com/albums/ww149/Rustyschell/65581663-00e0-4a84-b7b5-ee31ab102312.jpg

Did this work
Wayne

[luvrbus]

Wayne, that is a miter box from a Eagle with the 6v engine the ones from a 8v engine will not work for you, there should plenty of those around and cheap 

[rusty]

Thank You Clifford.

Does anyone have one or know where to get one.

Wayne

[luvrbus]

Wayne don't be concern if it has 3 shafts the shafts are easy to remove and plate over like your is now Eagle used both if the 6V engine had a gear driven alternator then it was 2 shafts.If you are in no hurry give me time and I'll find one for you lol you don't want to buy it from Ed or John I can tell you   

[Oonrahnjay]

Joe Thank you ...

Did this work?   
Wayne 

     Yeah, it worked fine.  Also, you might want to try the "IMG" link:



     When you find one, would you please post info on the manufacturer and part number (or at least model designation)?  Id sure like to have that info in my "components" file.  It looks like that miter drive might be useful in a lot of applications.  Thanks!

[rusty]

Thank You Clifford. I am in no hurry the one I have is fine for now. I am too anal about things like that. I try and be prepared if things go south on the road. Now I am kind of glad this came up so I have it figured out and not in a panic on the road somewhere.

Thank You Wayne

[bigred]

My 93/94 Prevost has the 90 degree belt drive fan BUT it is on the left side (DS) of the bus..

[rusty]

Bigred are you saying your prevost has the same box as in my picture?

Thank You wayne

[bigred]

Nope! Does not even look close !! Tried to upload a pic but could't get it done!

[rusty]

Thank you Rhet. Looks like it is an Eagle box.  Will wait for someone to stumble across a used one. I will call Jefferson to see if they have them just so I know where to get one if needed.

Thank You Wayne