Building Materials - Page 2
 

Building Materials

Started by Slow Rider, January 21, 2007, 01:52:15 PM

Previous topic - Next topic

John Z

I was at Menard's, and they have that 3/4" Birch faced cabinet plywood on sale now for 19.99 a 4x8 sheet after a 5.00 rebate. Not a bad price at all!
Custom patches, caps, t-shirts, lapel pins etc since 1994.
Silver Brook Custom Embroidery and Patches
www.silverbrook-mn.com

"Now I Know Why Turtles Look So Smug"

TomC

To address sturdiness, with my straight 3/4" plywood walls, I can assure you they are sturdy-since I have smacked into them several times and I weigh 300lb.  The only place I would use studs is where you were going to position the breaker boxes so you could run the wires inside the wall (with screw panels for access). 

When I first started my conversion I asked one person what was the best interior construction for the cabinets and walls-and he said the method that allows the cabinets and walls not to fall down while driving!  Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.