Gmc baggage door ajustment ?

[johnjem]

Hey. I just replaced rubber hinge with s/s hinges from ed. And still the bay door sits 3/8 inch lower then the rest of the doors. Is there a way to get it to sit higher??  I thought it was just a strached rubber hinge. But to no luck. It stayed in the same postion!!

[chessie4905]

See if the plywood floor (ceiling)is sagging  little.

[johnjem]

If that was the case. Wouldn't the bay door sit higher. Trying to post a pic


Sent from my iPhone using Tapatalk

[johnjem]

Try this


Sent from my iPhone using Tapatalk

[johnjem]

I would say yes to the floor sinking a bit. But not to much


Sent from my iPhone using Tapatalk

[chessie4905]

Spring tension different on that door?

[eagle19952]

Looking at the diagonal stripe...I am guessing it's been that way for quite awhile...unless you recently painted ?

[johnjem]

No its been painted for a while. No spring tension on that door. I removed torsion bars. Same as it was befor i removed??


Sent from my iPhone using Tapatalk

[eagle19952]

Well here's my last guess... the original door was damaged and that is a donor... they are "custom" fit and riveted ....

[johnjem]

I checked it out the skin of the door it's held on by about 20 9/16 bolts


Sent from my iPhone using Tapatalk

[johnjem]

I checked it out the skin of the door it's held on by about 20 9/16 bolts


Sent from my iPhone using Tapatalk

Right where the hinge is attached to skin

[zimmysurprise]

Not sure if this will help or not but here is the patent for the doors.

http://www.google.com/patents/US2837363