What time is the Board on?
 

What time is the Board on?

Started by TomC, February 20, 2016, 02:35:38 AM

Previous topic - Next topic

TomC

I looked at my personal information and the time listed was 4 hours behind west coast time. Translated-it is 6:34am here and the time listed is 2:34am. What is the board now in Guam or the Philippines? Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

Gary Hatt - Publisher BCM

Tom,

Does Donna know that you are up in the middle of the night posting questions to the Forum?   ;D
1999 Prevost H3-45
Gary@BusConversionMagazine.com

luvrbus

TomC with Gary it's 5 o'clock somewhere
Life is short drink the good wine first

Gary Hatt - Publisher BCM

1999 Prevost H3-45
Gary@BusConversionMagazine.com

Iceni John

Quote from: TomC on February 20, 2016, 02:35:38 AM
I looked at my personal information and the time listed was 4 hours behind west coast time. Translated-it is 6:34am here and the time listed is 2:34am. What is the board now in Guam or the Philippines? Good Luck, TomC
Not that far west of here.   Baker and Howland islands*, the well-known epicenters of the Mid-Pacific bus conversion industry, are both 4 hours ahead of California.   Apparently this is where Sam Walker now operates from.

John

* They are small uninhabited coral islands halfway between nowhere and nowhere else.
1990 Crown 2R-40N-552 (the Super II):  6V92TAC / DDEC II / Jake,  HT740.     Hecho en Chino.
2kW of tiltable solar.
Behind the Orange Curtain, SoCal.

chessie4905

Go to your profile tab.....see time offset....select automatically detect..... select save settings.....return to forum....done
GMC h8h 649#028 (4905)
Pennsylvania-central

Gary Hatt - Publisher BCM

That would be under the "Modify Profile" heading then under the "Look and Layout Preferences".

Dam, learn something new every day.  Thanks for the tip chessie4905!

Isn't this Forum just AMAZING???  I am glad I discovered it.
1999 Prevost H3-45
Gary@BusConversionMagazine.com

plyons

Sorry all for the delay:

Board time is MST:

$ date
Mon Feb 22 23:10:23 MST 2016

NTP wasn't working, fixed now.  

Hope this helps, Phil

chessie4905

Yeah,after posting fix, I noticed later in the day that the reset time wouldn't advance.
GMC h8h 649#028 (4905)
Pennsylvania-central