GM 4106 Window Seal/Gasket/Trim

[andyps]

My bus has all it's original slider windows. Several of them are almost completely stuck and one of them leaks (exterior seal). So I am removing some of them to take them apart and clean them up so they operate smoothly and then I want to reinstall and re-seal them.

What product do y'all recommend to re-seal them on the outside? Mine were sealed with some black caulk-type sealant.

Also is there anywhere to still find the original interior trim/seals? I have two photos below to show the condition of mine and so you know what I'm talking about:




Or can I replace them with something else?

Any other general to-dos or tips/tricks for my windows while I'm working on them appreciated too!

[andyps]

Also what do y'all do to replace the "D" window seals/trim and the door and driver windows seals/trim?

[OneLapper]

I'm in need of the same rubber trim, but I don't think it's still available.

Give Luke at US Coach in NJ.  He'll be the one to have it, or know if it's still available.

[LUKE at US COACH]

Hi Andy & Folks:
For your 4106, we stock the original frame to body window seals as well as felt runner for the sliders.
You can reach us toll free at: 1-888-262-2434.

happy & SAAFE!! Bussin' to All.

LUKE at US COACH