Stuck tag MCI 9

[opus]

Yes, sorry.... You are trying to blow through the grease that is caked in there.

[eagle19952]

displace the elder grease...to at least try to re-liquefy at best... fracing is the what you are doing, just don't tell the tree huggers

[Scott & Heather]

Lol. I'm all for fracking. It's keeping things humming nicely here in Texas ok, Cliff, I must be missing something. I have always messed with the problem tag alone. Are the two connected in some way? I never removed the good tag wheel....ok, so I have the porta power concept down. I'll report back my efforts


Sent from my iPhone using Tapatalk

[luvrbus]

Sorry Scott I for got the 9 didn't have the axle across to the other side like a D or a Prevost,but they still need to as level as possible ? have you checked the air pressure at the tag 

[eagle19952]

Sorry Scott I for got the 9 didn't have the axle across to the other side like a D or a Prevost,but they still need to as level as possible ? have you checked the air pressure at the tag 

i would not give up on a 20T press... if after keeping the max on it for a week (or a day)  i'd go bigger 50T

unlike the grinder..i'd suit up and stand back....way bak

[Scott & Heather]

Oh man. You got guts...lots of guts. Cliff, tag pressurizes. Bag gets hard as a rock....


Sent from my iPhone using Tapatalk

[Jim Eh.]

^ what he said.

but if you have pressure on it please don't "last resort heat."

[eagle19952]

but if you have pressure on it please don't "last resort heat."

no heat first and relieve pressure on subsequent attempts.

we used to press tumblers on the old Koehring backhoes.... that took a looooong corded switch... 100T PRESSES  and major guts lol