OTR tire / wheel newbee questions - Page 2
 

OTR tire / wheel newbee questions

Started by Darkspeed, August 23, 2015, 07:12:17 AM

Previous topic - Next topic

RJ

Todd -

Good to see that you're being conscientious about your wheels & tires.  Since we have to foot the bill. . .

Also glad to see that you're running 11R24.5s on your 4106 with the V-730 gearbox.  That taller tire compensates somewhat for the overall reduction in rear axle ratio with the automatic, compared to the OEM manual box. 

Take a look at the samson 11R24.5 specs for revs per mile.  Ideally for the automatic, you should find a tire somewhere in the 470-475 revs/mile for closest to OEM performance.

I also agree that the deep lug drive tire is overkill on a bus.

FWIW & HTH. . .

;)
1992 Prevost XL Vantaré Conversion M1001907 8V92T/HT-755 (DDEC/ATEC)
2003 VW Jetta TDI Sportwagon "Towed"
Cheney WA (when home)

Darkspeed

Thanks RJ, they come out to 463.6 revs per mile.

I went with lugs on the rear because im over adventurous and tend to wander out onto the grass at times.
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

Darkspeed

Spoke to the manager and he was super nice, even asked if they were polished because they protect the polished face when working.

Mount: 12.50 each
Spin balance: 33.00 each

They are near the Truck Pro store in Tampa so I may have to do some window shopping while the mount and spin.

http://mcgeetire.com/5353-tires-auto-repair-service-tampa-fl
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

Darkspeed

Tires mounted and spin balanced. Super nice place to get it done! took 45 min.





4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

TomC

Now all you need is the engine and transmission installed to take it for a drive. Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

Darkspeed

Quote from: TomC on August 28, 2015, 06:43:15 AM
Now all you need is the engine and transmission installed to take it for a drive. Good Luck, TomC

A little more than that but I sure am looking forward to it!
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...