2000 mci interlock problems solved
 

2000 mci interlock problems solved

Started by Homegrowndiesel, May 31, 2015, 08:18:19 PM

Previous topic - Next topic

Homegrowndiesel

I had posted about a dead throttle, trans problem in the past. As a note to anyone who may experience this. My problem came from a bad connection on a relay in the handicap lift circuit. I had read, that if you remove an bad relay from the circuit it would go back to default, ie no lift in circuit. As i started to test all relays, I found the offending bad connection, at the relay socket connection. This circuit runs thru all the door circuits and handicap lift circuit. I have read if you take the relay out it defaults to all ok. I will pull the offending relay and post back the results, but all I did was unseated and reseated the relays, I knew it was the problem, because as soon as I reseated the relay, the coach went into kneel recover mode. Dont have any one or any part of your body under the coach as you pull and replace the relays. Hmm, it did not reset till i put the relay back in. Will pull relay and report back.
Aerodynamic Eagle & MCI 102a3, 102d3 and NABI series 50 transit. Busnut x4