Fuel priming an 8v92 DDEC

[SKIP]

I needed to remove the EDU to access replacement of the TRS/SRS sensor. That opened the fuel system, which now needs to be primed. I was thinking of tapping, adding a shutoff valve and barbed fitting to the cover on my primary Raycor 1000fg to prime the system. Seams easier than breaking into the existing line with a "T" fitting. If I pump fuel into the Rayco with a hand pump, will that push fuel thru the system?    88 Prevost with an 8v92 DDEC 1.

Skip

[luvrbus]

You can pump fuel to prime by using the drain on the bottom of the Racor 1000 it should have a barb for a hose  and if you look close there will be a plug in the middle where the lines attach to the filter for priming take a electric pump and 2 gals of fuel you will be good to go priming from either location

[chessie4905]

   Now is a good time to add an electric pump inline for priming when needed; one less hassle in the future.

[SKIP]

LUVRBUS/CHESSIE4905   Thanks   I will look for the plug and into adding a pump. Will this push fuel thru the entire system and back to the tank?

Skip

[luvrbus]

Yep returns to the tank