looking for interface module
 

looking for interface module

Started by rayshound, November 04, 2006, 01:43:22 PM

Previous topic - Next topic

rayshound

    I am hooking up a series 60 to an allison ATEC 748.  I need a maximum feature throttle interface module. The DD application & installation manual calls it out so the transmission  will send a s signal to the S60.  It is for the throttle position sensor and the speed pick up. I have the ddec & the Atec manuals they show it for the DDEC 2 & the DDEC 3& 4 which is what I have (4) I went to Stewart & Stevenson the dd dealer with my manuals and they cannot find a number to call the module up. One little square with 4 plugs. I also have an interface box made by DMR they make a interface box that gives you a break out of the ATEC with remote relays for idiot lights, nutral safety, b/u lights etc but they don't offer this throttle interface. Any Ideas? Thanks Ray

RTS/Daytona

Quote from: rayshound on November 04, 2006, 01:43:22 PM
    I am hooking up a series 60 to an allison ATEC 748.  I need a maximum feature throttle interface module. The DD application & installation manual calls it out so the transmission  will send a s signal to the S60.  It is for the throttle position sensor and the speed pick up. I have the ddec & the Atec manuals they show it for the DDEC 2 & the DDEC 3& 4 which is what I have (4) I went to Stewart & Stevenson the dd dealer with my manuals and they cannot find a number to call the module up. One little square with 4 plugs. I also have an interface box made by DMR they make a interface box that gives you a break out of the ATEC with remote relays for idiot lights, nutral safety, b/u lights etc but they don't offer this throttle interface. Any Ideas? Thanks Ray

Ray

I have a .pdf file of that mystery 4 wire black interface box - ddec to atec interface - only has 3 components (diode 52k resistor and a 2.2 uf capacitor - but the file to big to attach and display  call me 386.672.0571  also have more info on "max throttle" feature

Pete RTS/Daytona

If you ain't part of the solution, then you're part of the problem.

RTS/Daytona

let's try this again

scanned in as .pdf - converted to .jpg - make smaller
If you ain't part of the solution, then you're part of the problem.

rayshound

Pete thanks for the circuit, I will give you a call.  Ray

twragg

Did you get your interface module?  I am trying to hook up the cruise control circuit on my ddec 3 that requires a MAXIMUM FEATURE throttle interface module.  I found one at General Diesel Electronics.  Tom

NJT 5573

GDE has got it all. 218-262-4553. Its all they do. Next day if you want.
"Ammo Warrior" Keepers Of The Peace, Creators Of Destruction.
Gold is the money of Kings, Silver is the money of Gentlemen, Barter is the money of Peasants, Debt is the money of Slaves.

$1M in $1000 bills = 8 inches high.
$1B in $1000 bills = 800 feet high.
$1T in $1000 bills = 142 miles high

luvrbus

hey guys Ray ask that question about 2 years ago

Bob Gil

Here is proof that some one is looking into the archives and getting more info for our reference.
Fort Worth, Texas where GOD is so close you don't even need a phone!

1968 GM Bus of unknown model 6V53 engine (aftermarket) converted with house hold items.

Had small engine fire and had no 12 volt system at time of purchase. 
Coach is all 110 w 14KW diesel genrator

luvrbus

you are right Bob these guys never give up trying to help fwiw Ray sold that bus sometime back