Pro Driver DC Model

[luvrbus]

Can the DC model of the Pro Driver with 1.12 software be made to work with a non EGR Detroit engines ? how about it Jim or others I was given 3 new ones but I don't know anybody running series 60 EGR engines that needs one and I don't if they even will work on a 60 series

good luck

[Hard Headed Ken]

The guys at Covington (now Clark) say it is backwards compatible. It connects to the J1708 data lines so I think it should work with DDEC III, IV and probably II. It may not have all the functions it would with V up. Here are the links to the all the manuals.

http://www.ddcsn.com/cps/rde/xchg/ddcsn/hs/3910.htm

http://www.ddcsn.com/cps/rde/xbcr/ddcsn/18SP528.pdf

Ken

[Timkar]

Send me one up Clifford and I'll try on my DDEC 3.......

[Busted Knuckle]

Clifford would those work on my '05's ? I'm pretty sure they are EGR engines as we just spent about $3000 dollars having a EGR and whatever goes with it replaced.
  BK 

[luvrbus]

I am trying to find out BK they were ordered for the DD15 engines


good luck

[RichardEntrekin]

Clifford,

I am running a ProDriver DC with a 1995 DDEC III S60. Wired right into the old harness, not one issue.

[luvrbus]

Richard, what software version are you running for the DDEC III with the ProDriver DC ? I was thinking about trying to load the ProDriver 3.0 software in the DC model I don't know if you can do that or not


good luck

[RichardEntrekin]

The coach is stored remotely, I will look this weekend and get back to you on the software rev number.