Series 60 oil pan - Page 2
 

Series 60 oil pan

Started by Seayfam, November 09, 2011, 09:48:50 AM

Previous topic - Next topic

rusty

I mite not have the gasket. I think I used it on the bus pan. I will have to check. Thanks for the information on the pan sizes.

Wayne

Boomer

I would go to the distributor (Pacific Power) and ask the parts dept. to copy the pages of the oil distribution system for truck, coach and marine.  Then you will be armed with enough information to make a decision.  Personally I have interchanged a few and would not install anything but the coach pan.  You should be able to find one somewhere on the used market.  Try the coach operators up there, Princess, RCT, Grayline, Premier, etc.  They might have a core engine outback that would have one. For that matter, Pacific in Anchorage might have a dead one out back, lot of S60 coaches running up there. Good luck.
'81 Eagle 15/45, NO MORE
'47 GM PD3751-438, NO MORE
'65 Crown Atomic, NO MORE
'48 Kenworth W-1 highway coach, NO MORE
'93 Vogue IV, NO MORE
1964 PD4106-2846
North Idaho USA

Hard Headed Ken

If anyone needs it, the part number on my aluminum shallow pan is 23505009 .

Ken
Link to my engine swap slide show

https://www.youtube.com/watch?v=oxAFFBcoTQI