Generator Bay Insulation - Page 2
 

Generator Bay Insulation

Started by dougyes, April 28, 2011, 06:31:14 AM

Previous topic - Next topic

trucktramp

Where do you find lead lined dry wall?  I am going to have to build a genny box soon.
Dennis Watson
KB8KNP
Scotts, Michigan
1966 MCI MC5A
8V71
Spicer 4 Speed Manual

Joe Camper

I put the 5/8 drywall between the plywood box and the 2 in mylar coated foam so it is holding up fine because it is not exposed.

Our conversion had thin lead sheets attatched to the back third of the bus floor under the original carpet and when we pulled the carpet for tile we also pulled that lead and I reused it in the gen bay.
Signing off from Cook County Ill. where the dead vote, frequently.

luvrbus

TR,you buy lead lined dry wall at commercial suppliers you won't find it at HD or Lowes if a hospital is being built in you area most of the time you can find enough scraps around there to build a quite box it's good stuff your hospitals use a lot of it

good luck
Life is short drink the good wine first

gus

Lead lined drywall?? I'm amazed at the things I learn on this board!!
PD4107-152
PD4104-1274
Ash Flat, AR

artvonne

  Im amazed at the lengths a guy can go to to weigh them down, lol.

PCC

I used Silvercote, the same stuff they use on racing cars to keep heat away from the driver's feet. Heat reflectiver, and some sound proofing. Works good for me.
For some, patience is a virtue.
Dealing with me, it is required.
Thank God - He is always patient.