Need measurements of MC9

[gumpy]

Can someone with a stripped MC9 help me out?

I promised someone I'd measure the inside of my bus so he could get a better idea of what he has to work with. Problem is, I left the bus in WY for a few weeks and didn't get it measured
before I left.

I need floor length from right behind driver seat to the step hump over the engine. Then, need step hump length. Also need inside width.

thanks

craig

[RickB]

Gumpster,
I don't have the humps over the wheelwells anymore so I can't help you there. Gone for two weeks and I get one stinking phone call??? I thought that might have been you that grizzly ate out there a week ago !!!
I'm expecting a full report on the great Wyoming trek tomorrow. Glad you and the family are home safe.
Welcome back,
RB 

[gumpy]

Sorry Dude.

Cell coverage is sparce in southern WY, and nonexistent where we camp.

Also, my mind was not always where it should be due to some family issues. We'll talk about it some time.

[scott332]

Not a MC9, but a MC12.  From what I've read from floor line & above is the same as a 9.
I'm going to try to attach a .PDF with some dimensions.

[gumpy]

Not a MC9, but a MC12.  From what I've read from floor line & above is the same as a 9.
I'm going to try to attach a .PDF with some dimensions.

That looks about right. I'll pass it along.

Thanks

craig

[Kenny]

Scott332's dimensions are correct for an MCI 9

[Highway Yacht]

I don't know about you all...but I think that PDF file deserves a sticky somewhere. Very usefall measurements there for anyone wanting to play around with floorplans and such. Are all the 8's, 9's, and 12's the same dimensions?

[buswarrior]

Close enough between the MC7/8/9/12 for dreaming purposes to use the same measurements.

Good idea, where do we put these things, MODERATORS?

happy coaching!
buswarrior