Docking Lights on a MCI

[luvrbus]

Any of you guys have photos for docking lights on a MCI (96 A) with SS siding I am going to help a friend install some today and he wants recessed without a flange and use a standard 4x2 driving light.
I did this on my Eagle with a SS housing but I am not real sure the same will work on a MCI,  got ideas I have no idea where to mount the lights on a MCI and he has had the housings made the same as my Eagle



good luck

[Tom Y]

Look on page 2.  Q. exspentsive washer.....  Not a close up but a pic.  Tom Y

[cody]

Both Bontragers and Trina had docking lights at a fraction of the regular price, I didn't have an interest in checking into them until recently when I was asked to back a 40ft S&S into a tight site by a new owner and saw how nicely the lights lit up the side areas.

[Dreamscape]

Next time you go Cody, check out a price for a couple for us. I like the idea after seeing Cliffords.

[Timnvt]

Sorry gumpy.  Not gonna happen.

[gumpy]

yeah, I figured.

Dang I'd sure like to get some of those. I have a set in the rear cap. Was supposed to get 3 sets and mount two in the sides, but I got the last two they had and they quit selling them after that.

I'd really like to find a set of those stainless ones at a very nice price.  If anyone happens to be near Elkhart, please look them up at the surplus places mentioned above.

craig

[muddog16]

Those are nice, I found a pair look and see if these are two expensive?   At this site there are several kinds!

http://www.iboats.com/Aqua-Power-Docking-Lights/dm/cart_id.488229503--session_id.788863861--view_id.3160

[luvrbus]

Guys I need to know where to mount the lights his will be just like mine with the housing behind the siding and no outside flange on the housing or light.
I'll try and get some photos to show you fellows what I am talking about


good luck

[Dreamscape]

Clifford, I have a pic of your Eagle, but the resulution is too small to get a good crop. Send me a pic and I'll post it.