Air Governor

[bevans6]

What was your original problem?  this thread started with 135 psi cut-out pressure...

Brian

[redbus]

Brian
In an earlier thread I said that when the engine was at an idle the air dryer would spit at about 100psi (a very slow lazy spit) but running down the road it works normal cutting out about 115psi. I did not know if it was the dryer or governor so I started with the governor.The Bus just started  doing this and we are on a 7500 mile trip stopping in Indiana for a while where I can work on it. I would like to get this fixed before we continue on North then West.