Blower belt

[Ed Hackenbruch]

 I just found that i have a blower belt that a guy gave me last year that i can not use.  It is a Gates Tri Power  CX 109  that is 7/8" x 113"  or 22.2mm x 2875mm for our Canadian members.   I think that he had a MCI 8. Can't think of the right term, but it is what i would call "toothed". Free to anybody that wants it. I will even pay postage.

[rv_safetyman]

Ed, you got my attention.  I used to be the blower belt expert at Gates for the Drag racing market.  Fun assignment.

Just to be clear here, I think Ed is talking about the belts that drive the blower for MCIs to flow air across the radiator.  That belt is what the industry calls a notched or molded notch belt.  Some folks use the term toothed belt to mean a timing or synchronous belt.  Here, the notches are to make the belt bend better around the pulley.

Jim

[rdbishop]

Ed,

I'll take it and pay postage.

Richard

[Ed Hackenbruch]

Its yours, i just need an address to send it to.  Thanks Jim, i was drawing a blank there on terminology.......of course as you know that is normal for me!!!!

[rdbishop]

Ed-I sent you a PM

Richard

[Ed Hackenbruch]

Richard, i ran into a problem and sent you a pm. Please let me know if you got it.  My computer is not always reliable when i am corresponding with people so i like to have confirmation that they did get what i sent to them.  Thanks, Ed

[rdbishop]

Ed,

Just recieved your pm, and no problem. Thanks anyway.

Richard

[Ed Hackenbruch]

Thanks Richard, and sorry about that.  Ed