window coverings

[ruthi]

We are going to have the automated window shade on the windshield, but are wondering what we are going to use on the drivers window and door windows. The dina has the air door, so it is a bit of a challenge. We may eventually do something different with it, but for now, it is what we have. We relocate every day or two, so the coverings need to be something simple, but something that looks nice. There are only two large original windows up front, havent decided what to do with them yet either. Thought about the automated covers, but would really like something that looks a little nicer. Any suggestions?

[robertglines1]

we used roman shades and really like them...on entrance door mounted above door frame and just let it down at night...they colapse down to about 9 inches when up..

[luvrbus]

Ruthi, try these guys www.justblinds.com they may could build something for you and on the big windows cellular is the best way to go we have the day/nite and I would not go with those again.




good luck

[bryanhes]

Ruthi,

I work for Pella windows. We have a shade called a room darkening shade that is cellular fabric shade and it is great for darkening the room. It has 3 layers of fabric. I could check on it if you like. It may be the same type shade that Clifford was recommending as I am sure the same supplier sells to others.

Bryan

[ruthi]

thanks yall. Bryan, we have those shades in our current bus. They have worked well, but I dont see them working on the door and driver areas. The biggest problem is the strange shapes.

[luvrbus]

Ruthi, give MCI a call I know they made shades that ran on a rail for the doors,windshields and side windows for MCI's they may have a set for a Dina. 


good luck