Onan 6.5 commercial remote start
 

Onan 6.5 commercial remote start

Started by Paladin, November 20, 2009, 04:59:00 PM

Previous topic - Next topic

Paladin

My Onan has a plug for a remote start and I have a remote panel minus the harness but don't know the wiring to the plug and can't seem to find a diagram, does anyone happen to know? I have the manuals etc but can't really see it clearly in there either, maybe I'm dense.
'75 MC-8   'Event Horizon'
8V71  HT740
Salt Lake City, Utah

"Have bus will travel read the card of the man, a Knight without armor in a savage land...."

gumpy

I have one for the 7.5.  I was going to buy the harness, but they wanted $20 just to order it. I cut the end off and wired in a 7 prong trailer connector for less than half that.

Send me your model number. Maybe I can find you a diagram. I found a trick on the Onan website that got me mine for free. They don't normally make it available to their customers
as it forces them to pay excessive fees to their distributors for installation.

craig
Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"