8v92 blower flex drive
 

8v92 blower flex drive

Started by robertglines1, October 29, 2009, 09:45:52 AM

Previous topic - Next topic

robertglines1

Just came from Detroit dealer ..They said my ufo is from the blower flex drive..does this make sense???ufo was in pan and was 1/2 snap ring along with a couple of very small metal parts flat 10thousands           thick by 3/8 square..they said 1800 dollars to fix and run rack?
Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana

robertglines1

AFTER FURTHER RESEARCH I have discovered it is called a flex drive. do I have to pull the blower to replace.
Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana

luvrbus

no, pull the cover at the back of the engine it is the plate at the very top level with the blower , it could have a power steering pump or a belt drive in place of a cover.  It will have a shaft that turns the blower with splines remove the snap ring and pull the shaft out don't lose the spring, still bet it is a old keeper from a drive.The snap ring they are talking about holds the blower shaft in place


good luck
Life is short drink the good wine first