Oil Seal for Axle Shaft
 

Oil Seal for Axle Shaft

Started by qayqayt, May 15, 2009, 09:34:29 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

qayqayt

May 15, 2009, 09:34:29 AM
Our Transit Museum has a 1947 Fageol Coach.  We need a 7 stud oil grease seal for the right side axle shaft.  Any thoughts on how I might find one?
Bryan
Vancouver BC
GM PD-4108

TomC

#1
May 15, 2009, 09:52:07 AM
If it's just for the axle end-make it.  Good Luck, TomC
Tom & Donna Christman. 1985 Kenworth 40ft Super C with garage. '77 AMGeneral 10240B; 8V-71TATAIC V730.

NJT 5573

#2
May 15, 2009, 10:30:59 AM
I use silacone, no gasket.
"Ammo Warrior" Keepers Of The Peace, Creators Of Destruction.
Gold is the money of Kings, Silver is the money of Gentlemen, Barter is the money of Peasants, Debt is the money of Slaves.

$1M in $1000 bills = 8 inches high.
$1B in $1000 bills = 800 feet high.
$1T in $1000 bills = 142 miles high

bobofthenorth

#3
May 15, 2009, 10:40:42 AM
Like Tom said, ball pein hammer and some gasket paper is the way the old timers did it.
R.J.(Bob) Evans
Used to be 1981 Prevost 8-92, 10 spd
Currently busless (and not looking)

The last thing I would ever want to do is hurt you.
Its the last thing but its still on the list.

qayqayt

#4
May 15, 2009, 11:40:09 AM
It's made of very thin sheet metal with a bit of a lip on it.
Bryan
Vancouver BC
GM PD-4108

Dallas

#5
May 15, 2009, 12:13:57 PM
Can you get a picture of the part? I'm not sure if you mean the axle shaft cover gasket or the oil seal at the back of the hub. What you describe sounds like a speedy sleeve.
What company manufactured the axle? maybe we could go from there? And if you have a parts book, or even off the parts themselves, it would sure help.
Print
Go Up Pages1
User actions