Welding question for tanks

[NJT 5573]

400 is to big for 1 tank. Build several smaller ones and hook them togather. I'll be watching for you around Eugene, you're the one driving with the binoculars, right! Really, I hope your eyes get better and you can drive for a long time.

[JohnEd]

NJT,

I'm still getting by.  Thanks   I will be making at least three tanks including the stock item that i hope I can include.  Thanks again

Craig,

I will have to have the metal cut to size ny a shop.  Thanks for the tip about rolling the edges.  I will certainly do that....definately.  Thanks

Tom,

These fuel prices will definately put a crimp in my style.  I want to travel much more than I can actually afford.  I will be making BioD and I want to take as much of my fuel with me as I can.  As I empty tanks I will use them for the BioD making process.  I intend to make it on the road in 30 gallon batches.  Lotta dreams here but this is the very general rough plan.  You are right though in that if I didn't have a really good reason for carrying that much fuel I would be a fuel  ::)to do so.

Ace,  I will definately look into it as a possibility...plastics.  I will be loading the tanks with BioD 100 not B10 or B20.  Everybody involved says to avoid all plastics as they have a "life span" that is shortened by straight BioD.  I would use ABS in a heart beat if I were sure it would last ten years.  I'll let you know what I find out so we can compare notes.... they don't know everything.  John

Thank you all for all your help and comments.  Especially the guy that said "WTF?   Are you outa yur GD mind?"  That also helped.