Before and After Thread...
 

Before and After Thread...

Started by Darkspeed, August 25, 2015, 02:55:29 PM

Previous topic - Next topic

Darkspeed

Il start.. Abra-ka-pocus!

Could not resist, today is first time I feel like im going foreword vs backward.
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

LowTide

Congrats, looks like you have been busy and it's always a good feeling to have the tides turned in your favor.!

On another note, do you really trust those cinder blocks?

I must say you have a few more honies than I do.

Mike
Mike and Lori
Sunny Phoenix Arizona
"1973 MCI MC-7 Challenger"
"Just Misbehavein' "


"A nation of sheep helps breed a government of wolves"

fortyniner

And that was just angle grinder/brush and power washing!?  What the heck do you have for breakfast? I think I need some.
Tom Phillips
PD4106-453
PD4106-2864
87 Alfa Milano
93 Range Rover
87 190e-16 Mercedes
92 Jeep Comanche

luvrbus

Those concrete blocks the way he has it are pretty stout they hold some where around 2000 psi, the only place we ever filled those with concrete on WalMart stores was where a ceiling joist was kinda scary if you are thinking about running to a WalMart in severe weather   
Life is short drink the good wine first

Oonrahnjay

Quote from: luvrbus on August 25, 2015, 06:39:35 PMThose concrete blocks the way he has it are pretty stout they hold some where around 2000 psi, the only place we ever filled those with concrete on WalMart stores was where a ceiling joist was kinda scary if you are thinking about running to a WalMart in severe weather    

    Maybe the blocks I have dealt with in the past were pre-cracked but some of them seemed pretty brittle.  I know that the setup in the photos is "probably OK" but they scare me. 
Bruce H; Wallace (near Wilmington) NC
1976 Daimler (British) Double-Decker Bus; 34' long

(New Email -- brucebearnc@ (theGoogle gmail place) .com)

luvrbus

I wouldn't be under it for sure,and they will break if not level we weren't allowed to use 1 with a chip larger than dime lol the block manufacture hauled off a load every day most of those ended up being sold at the big box stores like Lowes and HD    
Life is short drink the good wine first

Darkspeed

They are leveled , they are sitting on a buried cast block , the also have rebar and are poured almost full.

Last week I had to unload an 18K LB portable building from a trailer by myself without a crane or forklift. Had to go full on Egyptian on it. 
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

Oonrahnjay

Quote from: Darkspeed on August 25, 2015, 07:05:42 PM
They are leveled , they are sitting on a buried cast block , the also have rebar and are poured almost full... 

   That's different ...
Bruce H; Wallace (near Wilmington) NC
1976 Daimler (British) Double-Decker Bus; 34' long

(New Email -- brucebearnc@ (theGoogle gmail place) .com)

Scott & Heather

If they have rebar and are filled...makes me sleep better. But my friend in high school lost his dad because the cinder blocks underneath the car crumbled while he was under it. Blew his shoes right off his feet. Saddest part was his dad was working on his car...so he feels a little guilt even though it wasn't his fault. Anyway, totally off topic, that redo of the wheel well just confirms in my mind that you have an amazing attention to detail. I hope you meet you someday...amazing. I'm loving watching your build...really cool stuff you're doing. If you ever sell your coach, I hope it goes to someone who can appreciate what you're doing to it from the inside out.
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

Darkspeed

Quote from: Scott Bennett on August 26, 2015, 08:00:43 AM
If they have rebar and are filled...makes me sleep better. But my friend in high school lost his dad because the cinder blocks underneath the car crumbled while he was under it. Blew his shoes right off his feet. Saddest part was his dad was working on his car...so he feels a little guilt even though it wasn't his fault. Anyway, totally off topic, that redo of the wheel well just confirms in my mind that you have an amazing attention to detail. I hope you meet you someday...amazing. I'm loving watching your build...really cool stuff you're doing. If you ever sell your coach, I hope it goes to someone who can appreciate what you're doing to it from the inside out.

Thanks Scott, I really appreciate that! Im sure we will meet one day, I am kind of a lurker at the Arcadia meet if you ever go. I really enjoyed looking at all of your build photos as well, very impressive.
4106 6V92TA MUI + V730 8" Lowered Floor & Polished > http://www.busconversions.com/bbs/index.php?topic=24673.0 QuietBox > http://www.busconversions.com/bbs/index.php?topic=29946.0
It's all math and metal...

Scott & Heather

Thanks Todd :) I was at Arcadia last year. Maybe we will be there again sometime :)


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9