Water Temp Sensor

Scott & Heather · May 19, 2014, 08:16:26 AM

Trying to work down a list of coach work this summer and I'm stuck wondering what the thread size is on the water temp sensor wire stud. I'm missing the nut and want to buy a new one but don't know what the size is. This is for the water temp sensor curbside, 6v92 turbo NON DDEC (mechanical). Here's a pic of the stud I'm talking about:

Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.

Boomer · May 19, 2014, 08:58:26 AM

Looks like 10-32

boogiethecat · May 19, 2014, 08:59:56 AM

They are frequently 10-32 but just as many aren't. it looks like there's a nut still on there that you could remove and take to the store with you....

luvrbus · May 19, 2014, 09:07:19 AM

Take the nut off, only supposed to be 1 nut a fiber and copper washer on the sending unit

Scott & Heather · May 19, 2014, 10:18:59 AM

That but it is stuck on there. The whole dealy spins. I spent an hour trying to get it off

Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.

luvrbus · May 19, 2014, 10:51:14 AM

If the whole dealy(center) is spinning it's time for a new sensor that one won't be any good

Scott & Heather · May 19, 2014, 11:26:07 AM

Much thanks! It was indeed 10-32. You guys are invaluable.

Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.

Scott & Heather · May 19, 2014, 11:26:55 AM

Cliff, just read your reply. Bummer...super bummer. Ok. Who do I call and what part number do I order?

Sent from my iPhone using Tapatalk. Clumsy fingers may contribute to mistakes.