genrator question

[uemjg]

I was told today by Wrico that my I needed to make sure that my generator has the neutral bonded to ground.  What is the best way to do this?

[bevans6]

The easiest way is to look for the connection between the generator chassis and the neutral wire.  If you can't see one, use a DVM set on tone to check for continuity between neutral and ground.  What kind of generator is it?

Brian

[uemjg]

Made by wrico.

[uemjg]

The easiest way is to look for the connection between the generator chassis and the neutral wire.  If you can't see one, use a DVM set on tone to check for continuity between neutral and ground.  What kind of generator is it?

Brian

So as long as there is a connection between neutral of the generator head and the generator chassis then is that neutral-ground bonding?

[bobofthenorth]

So as long as there is a connection between neutral of the generator head and the generator chassis then is that neutral-ground bonding?

NO.

This subject has been discussed to death in the past.  You need to use the search function and come back when you can ask a question that hasn't already been asked and answered 100 times.

[uemjg]

NO.

This subject has been discussed to death in the past.  You need to use the search function and come back when you can ask a question that hasn't already been asked and answered 100 times.

Bob,

Thanks for taking the time to respond to my question, but since I was directing this at bevans6 then anything other than a positive response is not welcomed.  what you don't know is that i have done the serch and the results have not really answered my question, so hence I am asking again.

[lvbob]

hoorah uemjg