Bus board sharing info?

robertglines1 · April 20, 2013, 07:16:51 PM

Thank you for your help! just trying to bring two good guys(in my opinion) together. For the good of both. He is a tech guy like you and can figure it out. I'm still trying to get past two finger typing. Much rather be bustin knuckles--sorry BK. Bob

muldoonman · April 20, 2013, 07:36:18 PM

Bob, Jon has helped me out many times over there. Including several folks on here with my Prevost. Thanks all.

glen s.

robertglines1 · May 03, 2013, 06:31:18 AM

Jon is still trying:He got a E-mail saying to re-register and write sentence about buses . His reply; I have owned three Prevost coaches. still no go? His old handle was prevosman and does not work for him. Just a update. Silence----

plyonsMC9 · May 03, 2013, 11:24:12 AM

Hi folks. I'm checking into this and will post back here when resolved as well. Thanks for bringing this up. We'll git 'er going for sure.

Best Regards, Phil

plyonsMC9 · May 03, 2013, 11:33:01 AM

Hi all, I have a prevosman who was last active almost 500 days ago. Does this sound right? If someone would PM me his email address I'd be glad to work directly w/ him to get his old ID up & working again. at the very least I can get him a new 'handle' if he would prefer.

Best Regards, Phil

robertglines1 · May 03, 2013, 01:15:08 PM

He is reading-- just can't post. Is helping a busnut changing norgren valves today. I will ck and make sure I can share his contact and pm you direct. It is my understanding he is exchanging e-mails with someone at BCM. By the way prevosman is the one but the site will not let him on for some reason. 2nd down on like page 89 I think Jon W----. He has not been let on for those 500 days. Bob

robertglines1 · May 04, 2013, 04:43:26 PM

All is good in bus land. Phil and prevosman have figured out problem. Thank you to all parties involved. Bob

muldoonman · May 04, 2013, 04:50:18 PM

Thanks Phil! Wecome back prevosman. You have helped me several times in the past on the other board.

"Now if I could get that cat to come down and work on my old crate."

Scott & Heather · May 05, 2013, 06:25:14 PM

And bob, I second that motion. Don't you ever leave here....ever!

Sent from iPhone via Tapatalk

robertglines1 · May 05, 2013, 06:50:02 PM

My leaving was never a issue to me. Scott you and others are teaching me something new each day! A little misdirection and you got it figured out. Watching roof coating thread close now. The clear coat (roof)on my 98 is peeling in spots. The same problems discussed on other boards/ shared here. Bob

Tikvah · May 06, 2013, 04:00:47 AM

Bob, you mentioned that the boards were "Linked". I'm the admin for MCIBusTalk. How do we link the boards?

Even as an Admin on MCIBusTalk I find both boards very helpful.

Dave

Jon · May 06, 2013, 05:52:06 AM

I am on board. I want to thank Phil for allowing me to register.

I am a long term Prevost owner, having had 3 store bought conversions. Over the years I have learned a lot about the Prevost systems and have done my own work on my coaches since the mid nineties. Glad to be here. Special thanks to Bob for his help.

As soon as I figure out how I will create a signature.

Scott & Heather · May 06, 2013, 06:04:40 AM

Quote from: Jon on May 06, 2013, 05:52:06 AM
I am on board. I want to thank Phil for allowing me to register.

I am a long term Prevost owner, having had 3 store bought conversions. Over the years I have learned a lot about the Prevost systems and have done my own work on my coaches since the mid nineties. Glad to be here. Special thanks to Bob for his help.

As soon as I figure out how I will create a signature.

Great! If you're a friend of Bob, you're a friend of mine

robertglines1 · May 06, 2013, 07:53:37 AM

Dave;only by what results me and others bring over from forum post on other boards and post here. Welcome back Jon (prevosman) .New handle here--is now same on both boards. (prevostcommunity). To all Lurkers out there if you have a product to sell these boards cost! A little advertising goes alongggggg way.!! The powers to be prob shouldn't say, it but I'm just a customer. Bob