Starter Button Stopped Working - Page 2
 

Starter Button Stopped Working

Started by Lostranger, January 06, 2013, 11:15:29 AM

Previous topic - Next topic

Paso One

Another idea is installing a push button neutral safety switch.

I installed one so I could start the old VH 9 in gear, this allowed the transmission to warm up faster on our - 40 mornings.

Actually one of the factory upgrades for the VH-9 caused engagement grinding unless transmission was warm.

Worked well I might leave it wired up as it is just a jumper between two terminals in the front panel.  short piece of wire and a spring loaded button.

Your just pushing two buttons to start.  Theft device also :)
68 5303 Fishbowl 40'x102" 6V92 V730 PS, Air shift  4:10 rear axle. ( all added )
1973 MC-5B 8V71 4 speed manual
1970 MC-5A  8V71 4 speed manual
1988 MCI 102 A3 8V92T  4 speed manual (mechanical)
1996 MCI 102 D3 C10  Cat engine 7 speed manual  (destined to be a tiny home )

gus

The old semi I used to drive had two start buttons (Cadillac) and had to be held down until the oil pressure came up.
PD4107-152
PD4104-1274
Ash Flat, AR