8V71 Starter LH

[06 Bill]

Is the starter on a 8V71 12v Left rotation & 12v Right rotation wound in the same direction.
The part #s for a V drive & a T drive seem to be the same as far as the armatures go.
The splines are straight not spiraled as on a dedicated rotation armature.
Thanks in adv 06 Bill

[busguy01]

On auto type starters you can change rotation by clocking the brush holder to a different slot on the case.  I am fairly  sure that the same holds true on any DC starter or motor. You are changeing the relation of the brushes vs the field.
JimH

[RTS/Daytona]

But remember - the clutch on the starter gear has to ratchets in the opposite direction