Flywheelers
 

Flywheelers

Started by JohnVickrey, February 14, 2012, 05:39:39 AM

Previous topic - Next topic

JohnVickrey

Just wondering if anyone is going to Flywheelers?? 
John Vickrey   -   Dearing, GA
About 2 hours East of ATL on I-20 and 4 miles south of I-20.
Got Electricity and Water for 4-5 coaches.  Less that a mile to a
dumpstation.  Stop by and sit a spell.

white-eagle

yes, lots and lots of people go to flywheelers every year.   :D :D :D

but not us.  We'll be too far North cookin up a bluegrass party. (which i got permission to invite you to, btw.)

Ray and Sally are going.  I think they're taking the bus.

Tom
1991 Eagle 15 and proud of it.
8V92T, 740, Fulltime working on the road.

Fran was called to a higher duty 12/16/13. I lost my life navigator.

chart1

1976 MCI 8
8v71/740auto
8" roof raise

robertglines1

On the fence rite now depends when we get out of here and head south. If we make it will make show then head back up to Ocola area.  Bob & Judy
Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana

JohnVickrey

Tom, We're gonna miss ya!! 

Robert, Look us up if you get there.  We will be in the DRY accomodations, and leaving Friday Night.

Chart1, here is the link.  www.floridaflywheelers.org
John Vickrey   -   Dearing, GA
About 2 hours East of ATL on I-20 and 4 miles south of I-20.
Got Electricity and Water for 4-5 coaches.  Less that a mile to a
dumpstation.  Stop by and sit a spell.

gus

PD4107-152
PD4104-1274
Ash Flat, AR

robertglines1

Collection of about every kind of tractor and antique equipment you can think of.  working 1920's garage   steam engine  saw mill  10 acers of vendors. Barns full of every color tractors.
Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana

wg4t50

One could Google info on Flywheelers, give you much info, dates, location etc.
Too much to get into here.
Dave
MCI7 20+ Yrs
Foretravel w/ISM500
WG4T CW for ever.
Central Virginia

gus

I must be an antique too because I drove a JD steel wheeled tractor in my teens that I started by turning the flywheel by hand!!

It wasn't so much brute force as it was timing.
PD4107-152
PD4104-1274
Ash Flat, AR