How to make SHINE

[fredcliff]

What can be used to make the shine come out ?

[John316]

What can be used to make the shine come out ?

Make sure you take new pics, when you are done. I imagine Sam Walker will want the latest pics (especially if it looks better). LOL

God bless,

John

[rwc]

If your Shine won't come out then your condensation coil is too short or not getting enough air. Rod

[Busted Knuckle]

http://users.cwnet.com/thall/fredhobe.htm

[Van]

Are we talking paint, aluminum?

[Ed Brenner]

RE: How to make Shine

Me being originally from the Hills of Va this is my assumption!!!

http://www.stilldrinkin.com/dummies.html

Thanks ED

[wal1809]

Corn-yeast-well water and time

[fredcliff]

We want to polish up the aluminum on bottom

[JackConrad]

RE: How to make Shine

Me being originally from the Hills of Va this is my assumption!!!

http://www.stilldrinkin.com/dummies.html

Thanks ED

So Ed,
    Will ya'll be visiting Franklin County before Palmetto Cove?  Jack

[Ed Brenner]

Jack, Yes I will , Got to go get Mom the end of March

So I will be going thru there, plus the same person that supplied before is coming to my daughter's wedding in April.

Palmetto Cove will not be DRY !!!!

Sorry for the kinda highjack of post but it is shine and if you were at Arcadia you would know (Ask JacK !!!!! )
Thanks Ed

[PP]

Fred, I did all the stainless on my bus and a few aluminum items (mirrors, light housings). I found a cordless drill on high speed (1800 rpm) and a wool pad with the proper rouge (available by the stick in most hdwre stores) and then a nice soft hand buffing will give you a mirror like finish. It's a lot of work, but well worth the effort. Good luck, Will