Securing furniture and appliances to the floor ? - Page 2
 

Securing furniture and appliances to the floor ?

Started by grantgoold, October 19, 2010, 04:30:19 PM

Previous topic - Next topic

cody

With iggles we secure the stuff to the towed.  ;D

Rick 74 MC-8

With a bungee cords  when everything stops it gets snapped Back into place  :o ;D
About 20 Miles West Of Chicago

happycamperbrat

With all the stainless steel in the RTS I guess you could secure stuff with spit  ;D ;D ;D
The Little GTO is a 102" wide and 40' long 1983 GMC RTS II and my name is Teresa in case I forgot to sign my post

Dave5Cs

We put most of ours in Cabinets also. Seats are bolted through floor PITA but safe w/ seat belts that came bolted to steel seat frames.

If freestanding refrigerator you might put L brackets next to sides with plates on inside at front bottom with wing nuts and bolts going through both and a steel strap at back or top side hooked to bus side as not to tip but can be taken loose to clean behind etc.

Couches can be bolted own through floor or use big flush wing nuts. Lots of big washers. At least Grade 8 bolts. FWIW

Dave
"Perfect Frequency"1979 MCI MC5Cs 6V-71,644MT Allison.
2001 Jeep Cherokee Sport 60th Anniversary edition.
1998 Jeep TJ ,(Gone)
Somewhere in the USA fulltiming.