What's the difference in injectors??

[Happycampersrus]

What's the difference between a 9F80 and a 9280 injector??

Other than the letter F 

I know that they are both are 9 hole at a 80 shot, but I can't figure out the difference between a F or a 2. The only thing I can think of would be the spray pattern??

Any help would be appreciated.

[DaveG]

Wow, 98 lookers and no responses...not even the funny ones! I'd love to help, but as it has been brought to my attention...I don't even own a bus!

I'll be looking to see what you find out so I can be a bit smarter too.

[Chopper Scott]

I did some searching for you as I have no clue and it is well out of my element. What I found was injectors for the 8V92 all start with the # 92 and the last 2 didgets are the size. The 80 is "80 millimeter" which apparantly is generally as small as they come. An injector with the # 9225 would represent one that is 125 mm. I have not a clue what the f would stand for. The board has been slow today and i am sure wiser ones will be along soon enough.

[luvrbus]

The F is a California engine smog injector and the 9280 injector is federal from the 70's era also Scott lot's of 8V92 had 7G75 injectors

good luck

[Just Dallas]

Removed

[Happycampersrus]

Clifford

That makes sense. I just couldn't figure out what the F was.

I'm working on a MCI-9 with 9F80's and was just curious.