Wiper Motor

[Cary and Don]

Hi all,

We are looking for a part to repair our wiper motor.  It is the driver side motor and the port where the air line  attaches is cracked.  So If someone has the motor assyembly it would be a great help.  It comes off a Neoplan AN340, It's made by Sprague, Air-Push, model M567-130.

Don and Cary
GMC4107
Neoplan AN340

[fraser8]

I had a cracked wiper motor on an International we once owned. I used several layers of epoxy and didn't have any problems for the five years I owned it. No air leaks, just a thought and another quick inexpensive fix.

[Sammy]

Did you try some JB Weld?....it is also a 2 part product...sold in most auto parts houses.

[Cary and Don]

Cracked was a little understatement.  Half of the one fitting hole is gone.  It looks like it had been glued up before.  Now the piece is gone.  Looks like I will have to find someone that sells parts for these Sprague units.

Don and Cary
GMC4107
Neoplan AN340

[NJT 5573]

At least you can buy one.

[Cary and Don]

Do you know who carries these things.  The model numbers don't match the ones I have found on the internet. Sprague doesn't have a site.

Cary

[Sojourner]

Try http://www.rometruckparts.com/

E...bay has one #380023676317....Model: HP200

FWIW

Sojourn for Christ, Jerry

[Cary and Don]

I saw that one, but it doesn't look anything like our motor.

Don and Cary
GMC4107
Neoplan AN340

[Sammy]

Try contacting these folks: http://www.cvgrp.com/uploadedFiles/Pages/140_-_Electrical_Mechanical/SpragueBro(1).pdf

Post a pic of it , might recognize something like it, etc. Only had 2 Neoplans in our fleet for a very short time, a few years ago.