Vanner battery monitor
 

Vanner battery monitor

Started by epretot, July 06, 2025, 02:49:04 PM

Previous topic - Next topic

epretot

My battery balancer was damaged by some flames coming from my cheap Chinese battery charger. I will post about that later.

I replaced my Vanner with a different model with the same specs. This newer model has a "power" light. This light is not currently lit.

My battery balancer for the house batteries has a "standby" light to show it has power. Another light comes on when its operating to balance the bank.

Does anyone know if this should be lit all of the time?

Thanks
2000 MCI 102 DL3
Loveland, OH

thomasinnv

I believe the power light only comes on when the ignition is on. That is not actually the balancer, it is the controller for the balancer. It illuminates the dummy lights on the dash when there is a balance issue.
Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 12.7/Alison B500
95% converted (they're never really done, are they?)

epretot

Quote from: thomasinnv on July 07, 2025, 06:50:06 AM
I believe the power light only comes on when the ignition is on. That is not actually the balancer, it is the controller for the balancer. It illuminates the dummy lights on the dash when there is a balance issue.

Great. Thank you.
2000 MCI 102 DL3
Loveland, OH