1 Gauge Jumper Cables - price?
 

1 Gauge Jumper Cables - price?

Started by plyonsMC9, October 17, 2021, 08:19:17 AM

Previous topic - Next topic

plyonsMC9

Gary H & I were noticing the price of the 1 gauge, 25 foot jumper cables I purchased just a few months had tripled in price since then when I purchased them at $99, and now $279.  I got curious, searched around and found most were around the same price, approximately.

Then I came across this,

https://econosuperstore.com/itm/1-gauge-25-heavy-duty-800-amp-auto-truck-jumper-booster-jumping-battery-cable/

$50 for 25 foot, 1 gauge ?  for real - am I missing something?  Anyone had dealings with this site - it looks legit.  The rest of their products look reasonable.  Maybe overstock - I may buy a bunch and corner the market!!   ;D  (kidding of course)

Kind Regards all, Phil
Northern Arizona / 1983 - MC9, 1995 MCI DL3-45

luvrbus

I think have a set of those they are aluminum with a cooper insert at the clamp not a bad price if they are a 100% copper cable
Life is short drink the good wine first

plyonsMC9

Now that's a great question to find out before I start stockpiling jumper cables - find out what they're made of!!  I'll see if I can find out later today when I get back to a computer. 

The package does say copper insert so it may be the same.

Kind Regards, Phil

:)
Northern Arizona / 1983 - MC9, 1995 MCI DL3-45

DoubleEagle

They are Copper Clad which means a copper coating over the aluminum wire. If the copper is nicked then aluminum corrosion can occur. Many power lines are 100% aluminum and survive at the connections with anti-oxidation grease. 100% copper would be best, but costs.
Walter
Dayton, Ohio
1975 Silvereagle Model 05, 8V71, 4 speed Spicer
1982 Eagle Model 10, 6V92, 5 speed Spicer
1984 Eagle Model 10, 6V92 w/Jacobs, Allison HT740
1994 Eagle Model 15-45, Series 60 w/Jacobs, HT746

luvrbus

Quote from: DoubleEagle on October 17, 2021, 02:19:42 PM
They are Copper Clad which means a copper coating over the aluminum wire. If the copper is nicked then aluminum corrosion can occur. Many power lines are 100% aluminum and survive at the connections with anti-oxidation grease. 100% copper would be best, but costs.

I checked mine they are aluminum spend your money on something else Phil and corner another market 
Life is short drink the good wine first

windtrader

There is a difference in the current capacity between aluminum and copper. FWIW
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017

chessie4905

Over the years, I've  seen copper prices go crazy, only to drop way down again. Bought a 1000 ft. Spool of romex several years ago dirt cheap. Didn't need at the time, but glad I did every time I do wiring at home.
GMC h8h 649#028 (4905)
Pennsylvania-central

luvrbus

Quote from: chessie4905 on October 18, 2021, 06:22:47 PM
Over the years, I've  seen copper prices go crazy, only to drop way down again. Bought a 1000 ft. Spool of romex several years ago dirt cheap. Didn't need at the time, but glad I did every time I do wiring at home.

Yep I have 150 ft roll of 8-4 the price is still on the roll from H/D 66$ looking at the same roll at H/D it is now 400$ crazy and it not coming down either
Life is short drink the good wine first

plyonsMC9

Quote from: luvrbus on October 17, 2021, 03:38:47 PM


I checked mine they are aluminum spend your money on something else Phil and corner another market

Haha!  Thanks for that Cliff re: cornering another market!  I needed that humor.   ;D
Good point Windtrader re: current capacity, thx!

Kind regards, Phil
Northern Arizona / 1983 - MC9, 1995 MCI DL3-45

buswarrior

A busnut needs a set of jumper cables that will reach the front or rear and then out to the jumping bus.

You never go dead with the side of the coach readily accessible...

50 feet of welding cable with heavy clamps works a charm. Store carefully coiled into 5 gallon pail of your favorite building store.

Happy coaching!
Buswarrior
Frozen North, Greater Toronto Area
new project: 1995 MCI 102D3, Cat 3176b, Eaton Autoshift

luvrbus

Quote from: buswarrior on October 19, 2021, 10:11:07 AM
A busnut needs a set of jumper cables that will reach the front or rear and then out to the jumping bus.

You never go dead with the side of the coach readily accessible...

50 feet of welding cable with heavy clamps works a charm. Store carefully coiled into 5 gallon pail of your favorite building store.

Happy coaching!
Buswarrior

100ft of welding cable now would cost more than a tow
Life is short drink the good wine first

chessie4905

They make some jump starters now that have some serious output. I'm not talking about those drycell ones either.

https://www.hulkman.com/products/alpha100
Available from Amazon. There are also ones available that have higher output than that too.
GMC h8h 649#028 (4905)
Pennsylvania-central

Jim Blackwood

But isn't that what House batteries are for?

Jim
I saw it on the Internet. It MUST be true...

plyonsMC9

Lion house batteries don't work so well for jump starting.  So I've been told.  However, my Iota 24v charger for the engine batteries, plugged into the Lion house battery bank works wonders, and have had to use that a few times while working through some issues.

Welding cable in a pail is also intriguing.

Hope this helps, Phil
Northern Arizona / 1983 - MC9, 1995 MCI DL3-45

windtrader

Quote from: plyonsMC9 on October 19, 2021, 12:48:10 PMHowever, my Iota 24v charger for the engine batteries, plugged into the Lion house battery bank works wonders, and have had to use that a few times while working through some issues.
Exactly. The easy and simple way to resolve start battery issues. Another instance where a decent sized lithium house battery allows you to think you are at home, just plug stuff in.
Don F
1976 MCI/TMC MC-8 #1286
Fully converted
Bought 2017