Sisal Polishing Wheel Angle Grinder Problems - Page 2
 

Sisal Polishing Wheel Angle Grinder Problems

Started by Scott & Heather, April 07, 2016, 03:51:46 AM

Previous topic - Next topic

Scott & Heather

I'd love to hear the answer to the above question. But update, I did indeed but a harbor fake polisher. Same model that Scott is using. Bought some sisal wheels as well as some polish. Working really well to polish one of my 24.5"s. But, some of the scratches in the rim are deeper. Do I need to sand it? And the. Slowly move up in grit until polish? Cliff, I want my rims to blind me :) I'm going to polish the interior too in case I decide to use this one as an outer dual


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9

Bill B /bus

When our first bus was painted Bill Shoop recommended that he paint all the Al. The 1970 4108 had baggage doors, 2, replaced at some time. Color very different and not pretty. Paint job came out very well. After 10 years it still looked almost as good as the first view.

Bill
Bill & Lynn
MCI102A3, Series 50 w/HT740

Scott & Heather

Was is aluminum colored paint?


Sent from my iPhone using Tapatalk
Scott & Heather
1984 MCI 9 6V92-turbo with 9 inch roof raise (SOLD)
1992 MCI 102C3 8v92-turbo with 8 inch roof raise CURRENT HOME
Click link for 900 photos of our 1st bus conversion:
https://goo.gl/photos/GVtNRniG2RBXPuXW9